WELDING MACHINE / HEATCUTTING / ULTRASONIC / EMBROIDER MACHINE / CUSTOM MADE / REMODELING
Easily change the blade for both a Guillotine blade and a hot knife for heat cutting.
Especially, we only produce an angle cutter (SCM-100AS) for the slant cut, R cutter (SCM-80HR) which it is possible for of the R style cutting.
|
SCM-100AS
|
 |
 |
 |
The control panel ihas long life, and you can replace easily when it out of order. |
 |
Easy clean up. Polyester and some materials has carbon, machine has enough space to put clean brush. |
 |
Sub feeding device can realize no tensioning feeding. |
Not an air cylinder, we adopt the rotary method of the blade up and down with the step motor which control blade angle, we are confident in the quality of accuracy.
Besides, we adopted the control system the push button which was hard to fail and cheap, the quality just succeeded in reduction of the cost.
It equip a large fan so that hot air does not conduct it, diffuse the hydrogen chloride gas, it can prevent any rust of the machine structure in the long term.
| Cutting: |
heat blade | Memory: | 30 patterns |
| Cutting Speed: |
HeatCut: 26 pcs / 1 min when cut 200mm |
Weight: |
main 50kg |
| Dimension: |
H420 x L435 x W420mm |
||
| MAX Length: |
1 - 999,999mm |
Electricity: |
1P 110V (630W if you use hot knife) |
| MAX Width: |
100mm |
Optional: | Sub-feeding device / static remover |
| head rotate: | 0 - 75 degree each side | angle way: | paralleogram, Trapezoid, Straight / input |
